1967 Barracuda Fastback Misc. Parts - USED

-
Status
Not open for further replies.
Old Moparz

Old Moparz

Well-Known Member
Joined
Jul 14, 2008
Messages
101
Reaction score
10
Location
Newburgh, NY 12550
Rating - 100%
2   0   0
Contact seller
1967 Barracuda Fastback Misc. Parts - USED

(Check the photobucket link, lots more photos were added)

All of the following were removed from a 1967 Barracuda Fastback 15 years ago & stored indoors. Some of the parts are interchangeable with other years & body styles & some aren't so make sure you verify what you need. What is listed is all I have left.

Rear Window - Tinted (no scratches, glass only, no trim) ................ $125

Front Windshield - Tinted (minor scratches, glass only, no trim) ......... $75

Driver's Side Rear Window - Tinted (stickers need to be removed) .......$10

L&R Fenders (very rough, but good headlight bucket areas) ......... $50 / pr
(Please be aware that shipping costs on these fenders are 4 to 5 times the fender price. Pick up in person is preferred.)

Front Bumper w/ Lower Support Panel (good core) .......................... $50

Rear Bumper w/ 4 Brackets & License Plate Light (good core) ............ $75

Deck Lid (outer sheet metal okay, rust under rear edge) ................... $20

Driver's Side Lower Door Jamb (solid, will make good patch) ............... $20

Door Hinges (move freely) ..................................................... $15 / pr

Rain Gutter Mouldings w/ "L" Corners (5 pieces of 6 in set) ......... $35 / all........SOLD

Head Light Pods w/ Retainer Ring (bulbs removed for shipping) ..... $15 / pr

All parts but the glass will be packed safely at no charge in a sturdy cardboard box with actual packing materials, not newspaper & crossed fingers. I would prefer that the glass be picked up, but if you require it shipped I will build a wood crate for the cost of the materials only. I am in Newburgh, NY - 12550.

More Photos Here:
http://s469.photobucket.com/albums/rr55/OldMoparz1/1967%20Barracuda%20Parts/

Postal money order & paypal are fine, or cash if paid for & picked up in person. All prices are for parts only & buyer to pay actual shipping fees

Thanks, Bob
 

Attachments

  • F&R Tinted Wndows 67 Fastback Cuda b.jpg
    56.5 KB · Views: 789
  • 67-69 Cuda Bumper 01 b.jpg
    48.6 KB · Views: 769
  • 67-69 Cuda Bumper 07 b.jpg
    63.8 KB · Views: 800
  • A-Body 0052 b.jpg
    60 KB · Views: 748
  • A-Body 0053 b.jpg
    108.9 KB · Views: 745
  • A-Body 0016 b.jpg
    94.1 KB · Views: 778
  • A-Body 0023 b.jpg
    90.7 KB · Views: 771
  • Rain Gutter 1, 2, 3, 4 & 5 b.jpg
    109.8 KB · Views: 706
  • A-Body 0057 b.jpg
    96.4 KB · Views: 717
  • A-Body 0032 b.jpg
    109.2 KB · Views: 727
38 Dodge said:
What would shipping on the rear bumper to zip code 39532
Click to expand...


I will measure & weight the bumper tomorrow & check on the UPS site, but my guess is that it will be about the same price as the bumper. I shipped a similar sized item by UPS ground a couple of months ago for $86.
 
Armchairracer said:
can you send pics of the fenders, especialy the top mounting to the inner fenders
Click to expand...


I'll get those pics, too.

I know that flanged mounting area of both fenders are rusty. The best part of these fenders are the front sections where the headlights & points are. This is the only reason I saved them knowing that if someone needed this area to fix another fender they could cut it off these fenders.
 
Rear Window - Tinted (no scratches, glass only, no trim) ...... Sale Pending

Driver's Side Rear Window - Tinted ................................... Sale Pending
 
Hey there!

I'm interested in the deck lid. Could I get a few more pictures of that inner lip area though? Mine is pretty much rusted into non-existence, so anything is better for the resto i'm in the middle of.

Any chance you still have the trim pieces for it too (Or just the sheet metal?) I'll be looking at shipping it to WV, 25526.

Thanks,

Brendon
 
BrendonAF said:
Hey there!

I'm interested in the deck lid. Could I get a few more pictures of that inner lip area though? Mine is pretty much rusted into non-existence, so anything is better for the resto i'm in the middle of.

Any chance you still have the trim pieces for it too (Or just the sheet metal?) I'll be looking at shipping it to WV, 25526.

Thanks,

Brendon
Click to expand...



Brendon,

There are more photos in the link I posted, just scroll through......

http://s469.photobucket.com/albums/r...acuda%20Parts/

The trim pieces are long gone, sorry.

This deck lid would be okay to use for patching another one that may have more extensive damage. (that's the only reason why I saved it) The rust under the rear edge is bad, but it all depends on one's definition of "bad" I suppose. It would be best for someone who can pick it up in person since shipping is going to make this one very expensive part.

Not to kill my sale, but I wouldn't do it if I were you.

Bob
 
A big thanks to those who have purchased some of these parts, it helped clear out some much needed space & offset the cost of getting a few parts I needed for my Scamp. :thumbup:

Here's an update of what has been sold & what is still left.........


Exterior:
18) Rear Window ........................................................ SOLD
19) Front Windshield - Tinted (minor scratches, glass only, no trim) ................... $75 (pick up only)
20) Driver's Side Rear Window ....................................... SOLD
21) L&R Fenders (very rough, but good headlight bucket areas) ................. $50 / pr (pick up only)
22) Front Bumper w/ Lower Support Panel (good core) ................................... $50 (very heavy item)
23) Rear Bumper w/ 4 Brackets & License Plate Light (good core) ................... $75 (very heavy item)
24) Deck Lid (outer sheet metal okay, rust under rear edge) .............................. $20 (pick up only)
25) Driver's Side Lower Door Jamb (solid, will make good patch) ..................... $20
26) Door Hinges (move freely) ................................................................... $15 / pr
27) Rain Gutter Mouldings ............................................. SOLD
28) Head Light Pods w/ Retainer Ring (bulbs removed for shipping) ............ $15 / pr
 
Here's another update of what has been sold & what is still left.........


Exterior:
1:cool: Rear Window ........................................................ SOLD
19) Front Windshield .................................................... SOLD
20) Driver's Side Rear Window ....................................... SOLD

21) L&R Fenders (very rough, but good headlight bucket areas) ................. $50 / pr (pick up only)

22) Front Bumper ........................................................ SOLD
23) Rear Bumper ........................................................ SOLD

24) Deck Lid (outer sheet metal okay, rust under rear edge) .............................. $20 (pick up only)

25) Driver's Side Lower Door Jamb (solid, will make good patch) ..................... $20

26) Door Hinges (move freely) .................................................. ................. $15 / pr

27) Rain Gutter Mouldings ............................................. SOLD

2:cool: Head Light Pods w/ Retainer Ring (bulbs removed for shipping) ............ $15 / pr
 
Status
Not open for further replies.
-

Back
Top