1972 duster steering column

[mattsmopars]

I am in need of an exploded view of a floor shift steering cloumn for a 72 duster. I imagine that any 72 a-body is the same. I need to see if anything is missing on the bottom of my column. If you have one please post a picture of email it to me [email protected]
Thanks,Matt

 

[fourspeed]

No expolded view like you're after, but here is a ton of photos I took: http://www.fourbarrel.com/steeringcolumn.html

If you're talking about that bearing or bushing at the bottom of the column, it's not a real big deal. You can get a nylon bushing from Bill at RMS if you want. 570-443-7440

Mark

 

[mattsmopars]

Thanks for the info. Does anyone have any photos of the lower part of the steering column apart? I am wondering if i have the correct lower bearing or if i am missing something. I have the white plastic that goes in the very end of the cloumn, but it is bigger than the shaft in the column so I was thinking that i might be missing something. Please help me here.
Matt

 

[dusterracer]

I have exactly the same problem. Looks like something is missing- did you ever figure it out?

 

[hot rod valiant]

There should be a ball bearing in the plastic