7demon2
Registered User #1824
ok i have a 2 part question: first the easy one, is John Cambridge still the go to guy for tti exhaust systems? second question : has anybody run the tti 2 1/2 inch system to the stock manifolds on a 340? if so how did the first bend come out on the drivers side by the torsion bar? it is very close as you know. a picture of this side would be great. i have heard that you need to run either 2" pipe or 2 1/4 " pipe here to mate up with the 2 1/2 inch system because of this bend at the manifold. any thoughts? also current # for john cambridge if someone has it, thanks!