[WANTED] 2 sets rear boosters, 1 set primary boosters Carter AFB

[Brooks James]

Doesnt master if They are from a 400-800 CFM carb
Whatcha got ??
Also need 4 metering rod pistons, Springs and the plates on the top that hold them down

 

[mbaird]

Why doesnt it matter what they came off of ?

 

[Brooks James]

Why doesnt it matter what they came off of ?

I can tune the carb for my specific application for my engine
Its a cheat I learned from a buddy that raced NHRA Super Stock he put 750 boosters in a 500 carb, passed tech everytime

 

[66fs]

I'll check. Cover plates, high or flat?

 

[Brooks James]

I'll check. Cover plates, high or flat?

Flat, Thanks

 

[66fs]

found the top plates and the primary boosters. The secondary boosters have a ring?

 

[Brooks James]

found the top plates and the primary boosters. The secondary boosters have a ring?

Yes, a ring , did you also find 4 metering rod pistons ??
I really appreciate your effort !!

 

[66fs]

The pistons are the hard ones. They sometimes get messed up. I'll finish going through my stuff today.

 

[66fs]

What I found

 

[Brooks James]

Outstanding, I’ve used worse pistons successfully , those actually look pretty good. If you have any piston springs would be excellent.
Your PayPal info and amount to send ? You could easily get everything in a small flat rate postal box at about $10
If no Paypal will a postal money order or check work ?
Thanks
Brooks

 

[Brooks James]

Need some parts
2. accelerator pump arm to accelerator pump "s" link
2 clips that attach the metering rod pistons to the metering rods
12 booster mountings screws
16 bowl screws

need now
1 s link
clips
8 booster screws

Let me know
Brooks

 

[66fs]

I’ll check after Thanksgiving. I am out of town. Thanks, Dan

 

[Brooks James]

I’ll check after Thanksgiving. I am out of town. Thanks, Dan

Thanks,
I also need complete choke hardware for a competetion series

 

[66fs]

Thanks,
I also need complete choke hardware for a competetion series

That, I do not have.

 

[Brooks James]

Ok,cancel the request for the other parts, I was building a 400 Competetion series that was supposed to have all the parts. . The counterweighted secondary flap is missing. The carb is fairly rare and expensive. I probably have a snowballs chance in hell of finding another one at a reasonable price. you might be thinking that I could just use another but because of the very small venturi I think it is a one off part.