Bakerlite
Well-Known Member
- Joined
- Nov 12, 2007
- Messages
- 6,431
- Reaction score
- 3,311
I'm not going to attach the reeds until I'm ready to bolt it up, I'll get some pics of them then.
It's going in this A body. I put rack and pinion in it years ago. Every thing clears nicely.What's goin in? Is there clearance enough for K frame and steering linkage?
No, the reeds close up and direct all of the charge to the turbo once boost is made, they don't bleed boost off.Very cool setup!
Are the reed valves used in the same way as a blow off valve?
I have an old Offy under/over carb adapter for a draw-through setup. Basically the same concept. It did bring the carb up around 2" from stock.
More please....
I'm absolutely fascinated by this setup.
Thanks for walking us through it.
-AlV
I have thought about the wastegate, but I'm not sure it will be needed, so I'll run it up first with some pressure gauges and go from there.
I have absolutely no idea..