Map63Vette
Well-Known Member
Contact seller
Link to the ad for pictures and info http://lawrence.craigslist.org/pts/4197972961.html.
List of parts:
Trans - 73 model year I believe, 23 spline input has been shortened ~5/8 (should work fine with register style bushing/bearing), fairly recent rebuild, crossmember included
Bellhousing - aluminum overdrive unit with multiple patterns for different transmissions, lower inspection cover and ball stud included (might not be correct ball stud for A body, but functioned)
Shifter and linkage - Hurst Comp with T handle, new linkage from Brewers, extra linkage pieces that came with car (but don't necessarily belong)
RAM Musclecar series clutch disc - went in with 5.7 Hemi swap ~2 years ago, guessing 5000 miles or less, throwout bearing included
Clutch linkage - pedal side pushrod, Z bar, fork side pushrod, and clutch fork all included (has had fork side of Z bar shortened ~1 inch to clear headers in my application (again, possibly not A body but worked okay)
Extra input bearing retainer - trans currently has rare 5.125" bearing retainer to work with O/D bellhousing, have original smaller retainer as well if using with different bellhousing.
Want to get rid of all of it as a package, asking $1000 firm plus shipping from 66049 if you really want to go that route. Will consider driving to meet/deliver within reason for fuel cost.
List of parts:
Trans - 73 model year I believe, 23 spline input has been shortened ~5/8 (should work fine with register style bushing/bearing), fairly recent rebuild, crossmember included
Bellhousing - aluminum overdrive unit with multiple patterns for different transmissions, lower inspection cover and ball stud included (might not be correct ball stud for A body, but functioned)
Shifter and linkage - Hurst Comp with T handle, new linkage from Brewers, extra linkage pieces that came with car (but don't necessarily belong)
RAM Musclecar series clutch disc - went in with 5.7 Hemi swap ~2 years ago, guessing 5000 miles or less, throwout bearing included
Clutch linkage - pedal side pushrod, Z bar, fork side pushrod, and clutch fork all included (has had fork side of Z bar shortened ~1 inch to clear headers in my application (again, possibly not A body but worked okay)
Extra input bearing retainer - trans currently has rare 5.125" bearing retainer to work with O/D bellhousing, have original smaller retainer as well if using with different bellhousing.
Want to get rid of all of it as a package, asking $1000 firm plus shipping from 66049 if you really want to go that route. Will consider driving to meet/deliver within reason for fuel cost.