4 to 4,5 conversion with 4pot brakes

-

coronet69swede

Well-Known Member
Joined
Jul 13, 2015
Messages
118
Reaction score
12
Location
sweden
Hi fellow moparfans.
I have a 1967 dart 4pot front disc brake with 489 58inch wide rear drum.
Want to convert the bolt pattern. Weld the holes in the rear shafts and redrill for 4,5.
Not that easy in the front. Want to keep my calipers. Is there any disc and hub that will fit my spindel or should i weld the holes and make new holes in the front hub and make a new set of holes in the disc.

Johan
 
The Ram Man has rotors with 4.5" bolt pattern listed on ebay for your brakes.
 
easy conversion for the K/H disk setup to Mustang rotors.
 
Just been Reading the hole thread. Will do this.
Thanks for the info.

DSC05483.JPG
 
-
Back
Top