68GTconvert
Well-Known Member
Contact seller
Unfortunately I have to sell my 402 Stroker Motor
Short Block is COMPLETE
318 truck block Machined, bored, line honed, gear drive, new oil pump, pan, pickup, has windage tray. Scat 4.0 Cast Crank, eagle esp rods with arp, ICON 745 FORGED Pistons, Moly Rings. Clevite Bearings. SFI DAMPER & WATER PUMP INCLUDED. Hughes "Johnson Race Lifters.
Big Hughes Hydraulic Flat Tappet. I have cam card.
http://www.hughesengines.com/Index/p...=&partid=21862
With the Brand New in Box 63cc RHS Indy Heads compression will be 9.99 - 1 or so depending on your head gasket choice.
Comes with PRW 1.5 Stainless roller rocker new in box.
Mopar Performance Black wrinkle valve covers
Edelbrock RPM intake
Felpro Head gaskets
Intake bolts
Recurved New Electronic Distrib by 4 seconds flat
Just needs to be measured for pushrods and top end assembled. No pulleys but complete without carb.
All machine work and heads done by Brian at IMM engines. Short Block was assembled by MadDart on this site.
This motor will be about 500 HP and 520 Torque on pump gas.
$5350 Firm
Pick up only unless you arrange shipping.
Short Block is COMPLETE
318 truck block Machined, bored, line honed, gear drive, new oil pump, pan, pickup, has windage tray. Scat 4.0 Cast Crank, eagle esp rods with arp, ICON 745 FORGED Pistons, Moly Rings. Clevite Bearings. SFI DAMPER & WATER PUMP INCLUDED. Hughes "Johnson Race Lifters.
Big Hughes Hydraulic Flat Tappet. I have cam card.
http://www.hughesengines.com/Index/p...=&partid=21862
With the Brand New in Box 63cc RHS Indy Heads compression will be 9.99 - 1 or so depending on your head gasket choice.
Comes with PRW 1.5 Stainless roller rocker new in box.
Mopar Performance Black wrinkle valve covers
Edelbrock RPM intake
Felpro Head gaskets
Intake bolts
Recurved New Electronic Distrib by 4 seconds flat
Just needs to be measured for pushrods and top end assembled. No pulleys but complete without carb.
All machine work and heads done by Brian at IMM engines. Short Block was assembled by MadDart on this site.
This motor will be about 500 HP and 520 Torque on pump gas.
$5350 Firm
Pick up only unless you arrange shipping.