[WANTED] 67 Cuda trunk moulding clips

[GTSDustin]

Need the clips for the upper and lower trunk mouldings.
Or a nice set of mouldings with clips. Thanks

 

[RedFish]

Common 10-24 T bolts were used in the upper and lower. The most readily available is 1 inch length which works fine except for the 4 ends. Those will need to be cut short so they don't dig into the body. Factory used a closed nut on those ends also.
Mrgusa.com and other fastener suppliers have them.
page of examples...
http://classicclipsandautobody.com/store/page20.html

 

[GTSDustin]

Thanks, will check them out.