Ivoryk3ys78
Well-Known Member
I recently lost an exhaust cam lobe in my 318. When this happened it caused the exhaust pressure to ram out of the carb. We were able to get the new cam and lifters broke in but it didn't want to idle. We thought it was a vacuum issue. If you would try to idle it would die and if you did get it to to where you thought it would idle it would kinda idle and then surge up in rpms and back down and surge up and some backfiring.
We put my other carb back on. A 650 Avs2 and it is running fine.
I am wondering what the most common things that are likely to have been damaged in the carb from what happened. What are some things to look for when taking it apart.
Thanks a lot
Kevin
We put my other carb back on. A 650 Avs2 and it is running fine.
I am wondering what the most common things that are likely to have been damaged in the carb from what happened. What are some things to look for when taking it apart.
Thanks a lot
Kevin