duster360 Well-Known Member Joined Aug 8, 2008 Messages 3,825 Reaction score 308 Location Alabama Rating - 100% 33 0 0 Mar 18, 2019 #1 Contact seller Looking for a 29-30 slip yoke for 727 or A833 trans. Length is 8" from center of ujoint hole to end of slip part. Last edited: Mar 18, 2019
Looking for a 29-30 slip yoke for 727 or A833 trans. Length is 8" from center of ujoint hole to end of slip part.
physixx FABO Gold Member FABO Gold Member Joined Apr 29, 2005 Messages 5,755 Reaction score 1,433 Location Edison, NJ Rating - 100% 218 0 0 Mar 18, 2019 #2 I have one from a 727 but it measures just over 9 1/2" total length. Ken Edison, NJ
duster360 Well-Known Member Joined Aug 8, 2008 Messages 3,825 Reaction score 308 Location Alabama Rating - 100% 33 0 0 Mar 18, 2019 #3 I wonder why some of them are different lengths? I will have to check on that and get back to you.
physixx FABO Gold Member FABO Gold Member Joined Apr 29, 2005 Messages 5,755 Reaction score 1,433 Location Edison, NJ Rating - 100% 218 0 0 Mar 18, 2019 #4 Not sure either but the splines are deep inside the part that goes into the trans so it can be cut to the length that you need.
Not sure either but the splines are deep inside the part that goes into the trans so it can be cut to the length that you need.
duster360 Well-Known Member Joined Aug 8, 2008 Messages 3,825 Reaction score 308 Location Alabama Rating - 100% 33 0 0 Mar 18, 2019 #5 How did you measure it? Total length from end to end or from center of ujoint hole to end of slip part?
How did you measure it? Total length from end to end or from center of ujoint hole to end of slip part?
physixx FABO Gold Member FABO Gold Member Joined Apr 29, 2005 Messages 5,755 Reaction score 1,433 Location Edison, NJ Rating - 100% 218 0 0 Mar 18, 2019 #6 Total length from end to end. 9" to the center of the U-joint.
duster360 Well-Known Member Joined Aug 8, 2008 Messages 3,825 Reaction score 308 Location Alabama Rating - 100% 33 0 0 Mar 18, 2019 #7 How deep from the end to the splines?
physixx FABO Gold Member FABO Gold Member Joined Apr 29, 2005 Messages 5,755 Reaction score 1,433 Location Edison, NJ Rating - 100% 218 0 0 Mar 18, 2019 #8 3"
duster360 Well-Known Member Joined Aug 8, 2008 Messages 3,825 Reaction score 308 Location Alabama Rating - 100% 33 0 0 Mar 18, 2019 #9 That one may not work. Mine are 1 1/2" deep. If I cut the one you have down, that would put the splines on your 2" deep. Will have to pass, thanks for offering.
That one may not work. Mine are 1 1/2" deep. If I cut the one you have down, that would put the splines on your 2" deep. Will have to pass, thanks for offering.
physixx FABO Gold Member FABO Gold Member Joined Apr 29, 2005 Messages 5,755 Reaction score 1,433 Location Edison, NJ Rating - 100% 218 0 0 Mar 18, 2019 #10 I understand. Good luck with the hunt.
duster360 Well-Known Member Joined Aug 8, 2008 Messages 3,825 Reaction score 308 Location Alabama Rating - 100% 33 0 0 Mar 18, 2019 #11 STILL LOOKING
j061093409 1970 Dart Swinger 340 Reg Joined Nov 6, 2005 Messages 2,045 Reaction score 557 Location Wethersfield, CT Rating - 100% 10 0 0 Mar 18, 2019 #12 8” 1 1/2 in for threads
duster360 Well-Known Member Joined Aug 8, 2008 Messages 3,825 Reaction score 308 Location Alabama Rating - 100% 33 0 0 Mar 18, 2019 #13 j061093409 said: 8” 1 1/2 in for threads View attachment 1715305434 View attachment 1715305436 View attachment 1715305437 Click to expand... PM sent
j061093409 said: 8” 1 1/2 in for threads View attachment 1715305434 View attachment 1715305436 View attachment 1715305437 Click to expand... PM sent
7 70Roadkill Well-Known Member Joined Apr 2, 2017 Messages 603 Reaction score 97 Location Dexter Rating - 100% 12 0 0 Mar 23, 2019 #14 Not sure if your still looking or not but I have this one.
duster360 Well-Known Member Joined Aug 8, 2008 Messages 3,825 Reaction score 308 Location Alabama Rating - 100% 33 0 0 Mar 23, 2019 #15 Decided to get a new one. Thanks to everyone who offered.