bOb shingler
Well-Known Member
my best guess is you have an old direct connection reverse manual shift vb with some valves missing. let me check a bit further but the 1-2 shift governor plug is missing and needs to be there. it's the 3rd valve hole from the left in the bottom pic of the 1st bunch you posted. opposite of this valve there needs to be a 1/4"x2 1/2" rod for 71-76 vb's or a 1/4"x2 9/16" rod. on '69-'76 vb's the high pressure relief valve ball and spring need to be there. that's the hole/chanel in the valve body on the lower left. 2nd from bottom pic of the valve body.
you don't have a kick down linkage hooked up do you? if that gov. plug and rod is put in it looks like it will work as a reverse manual vb.
you don't have a kick down linkage hooked up do you? if that gov. plug and rod is put in it looks like it will work as a reverse manual vb.