73 Scamp window help

[73 V8 Scamp]

I have 1973 scamp 2 door hardtop and have a broken rollup quarter window. I am trying to find the hardware to replace the glass. I have the 2 bolts but it looks like their is a spacer and some kind of adhesive . Where can you find these pieces , in the manual the only car that type is close is the Barracuda...

Thanks

 

[ScampMike]

have you tried Year One?

 

[ScampMike]

not sure - but it sounds like you need this 1966-74 A B E-Body Quarter Window Roller

 

[73 V8 Scamp]

not sure - but it sounds like you need this 1966-74 A B E-Body Quarter Window Roller

All I need is the parts that bolt to the glass,I have the 2 bolts but their is some kind of spacer between the bolt and the glass and some kind of gasket. Thanks

 

[bkmcoolhand]

have you tried Year One?

Are these what your talking about. Glass Window Roller Hardware Door Dart 67-72 A-Body Mopar 1 Side | eBay

 

[73 V8 Scamp]

Are these what your talking about. Glass Window Roller Hardware Door Dart 67-72 A-Body Mopar 1 Side | eBay

This is what my Hardware looks like for the quarter window and is the same on both sides

 

[RedFish]

All I know is there will be some sort of isolator anywhere that metal would touch glass. Sometimes only a piece of felt paper sandwiched between. I just substitute as needed with felt paper, plastic washers, short pieces of fuel hose, whatever. RT Specialties might have reproductions of exactly like the factory used.

 

[ScampMike]

yep - sometimes you have to improvise -- hell, often times you can come up with something that works better than they did it back in 1971

 

[73 V8 Scamp]

Thanks that's the route I'm going to take

 

[ScampMike]

Thanks that's the route I'm going to take

good luck with it and if you find a something cool, let us all know - always good to have options when things come up!