741 w/ 3.55 and borg warner-style SG

-
Status
Not open for further replies.
stop the beast

stop the beast

Well-Known Member
Joined
Feb 4, 2009
Messages
268
Reaction score
12
Location
Arizona
Rating - 0%
0   0   0
Contact seller
Like the title says, it was pulled from a '68 fish that was still laying down two stripes about 4 years ago. It's a good working 3rd member that was stored in AZ.

The price if firm at $300. I have no problem shipping to the lower 48 states. Should be between $50 - $70 for shipping, maybe less to a business.





 
im intrested. i pmed you

what is different from the one you have to a regular sure-grip?
 
340plot said:
im intrested. i pmed you

what is different from the one you have to a regular sure-grip?
Click to expand...

Chrysler had two models, the clutch-type and bw. The clutch type uses many little clutches to lock up the diff and the borg warner type uses two cones. As I understand the inner cone bites into the outter cone lock up the diff.
 
Yup, good price. bmaudlin, if that unit ever quits pulling both wheels, take it out right away and get it fixed cause if you keep hammering it, it'll only be worth scrap price. Contrary to what many believe, those can be fixed by machining. I've been doing them over 20 years and I've seen the damage done when they quit working and the driver keeps pouring the chili to them...
 
Status
Not open for further replies.
-

Back
Top