8.75. Any other type of clip or pin?

[Richie]

Hi everybody:

On an 8.75 is there any other clip or pin besides the main retainers on an 8.87 housing where the axles come out. I'm getting one put together and there seems to be a part missing but I can't see anything in any manual. Thanks

 

[Alaskan_TA]

5 studs at each axle flange, no inner retainers.

 

[Richie]

5 studs at each axle flange, no inner retainers.

thanks

 

[Jadaharabi]

Do you means the 2 locks for the carrier bearing adjusters?
There is a lock for the adjuster on the adjustable axle bearing also.

There is no clip for the axle ends if you are using the green axle bearings. Because they are fixed in place and not adjustable.

 

[Richie]

Do you means the 2 locks for the carrier bearing adjusters?
There is a lock for the adjuster on the adjustable axle bearing also.

There is no clip for the axle ends if you are using the green axle bearings. Because they are fixed in place and not adjustable.

Is everything there in that picture?

 

[Jadaharabi]

No

I don't see the Locking paw for the axle adjuster.

Mancini Racing Axle Adjusting Nut Locking Pawl