833 4 speed clutch adjustment ??

[stroker402]

say can you guys tell me which way to turn the nut on the clutch adjustment rod.
I'm trying to get the pedal to grab lower to the floor. just replaced the Z-bar bushings with new ones....both ends .
turn the nut clockwise or counter clockwise ?
I searched for an hour on the internet and NO lUCK .
Thanks for your help !
JOHN

 

[1968FormulaS340]

Well, it would really help if you told us what you were trying to solve.

But generally, adjusting the nut (and fork) towards the back of the car should remove free-play.

Adjusting the nut (and fork) towards the front of the car should add free-play.

 

[stroker402]

Well, it would really help if you told us what you were trying to solve.

But generally, adjusting the nut (and fork) towards the back of the car should remove free-play.

Adjusting the nut (and fork) towards the front of the car should add free-play.

I looking to get the pedal to grab closer to floor.. It grabs real high now..

I guess a better way to describe the operation is to which way to turn the nut >>>>> clockwise or counter clockwise .

I assume
counterclockwise >> pedal grabs lower to floor
clockwise rasies pedal height. >> grabs higher .
Is that correct?

 

[Rocky_JS]

you want to loosen (remove tension) it to add toe play (lower to the floor)

 

[stroker402]

you want to loosen (remove tension) it to add toe play (lower to the floor)

Yes ... that's it .. that is what I thought .... just was not sure .
Thanks Guys !:burnout:
JOHN

 

[stroker402]

dartcharger 273 4 sp.