904 transmission question.

[Sean Mooney]

On a 904 can I switch the clutch pack and drum from a 4 clutch drum to a 5 clutch drum. Will it bind against the pump? Any other issues?
Thanks

 

[70aarcuda]

must have the correct pump to change out the drums...

you can put 5 clutches in a 4 clutches drum if you use the thin disc and steel....you are looking for .012 clearance per disc...check it dry

 

[Sean Mooney]

must have the correct pump to change out the drums...

you can put 5 clutches in a 4 clutches drum if you use the thin disc and steel....you are looking for .012 clearance per disc...check it dry

Thanks

 

[AJ/FormS]

Final clearance is by snapring selection.You may have to machine the pressure plate, to achieve the clearance. I have run a little as .010/plate
I leave the wavy spring in them, on the street, to cushion engagements.

Especially the in the hi-drum, to cushion the shift into reverse

 

[TrailBeast]

On a 904 can I switch the clutch pack and drum from a 4 clutch drum to a 5 clutch drum. Will it bind against the pump? Any other issues?
Thanks

I have cut the piston and pressure plate down to fit 5 in a 4, but I really wouldn't recommend it to the average Joe.