a body manifolds

[1966gtdartman]

Im looking for a set of a body exaust manifolds for a 71 318 motor Im putting in my 66 dart

 

[CUDACOX]

Im looking for a set of a body exaust manifolds for a 71 318 motor Im putting in my 66 dart

* I have the original pair of 318 manifolds off my 68 318.p.m. me if interested.

 

[EvilScamp]

I have a pair of 71 manifolds, PM if you don't buy from CUDACOX.

 

[cudacrazy67]

I also have a set from a 68 273 if noone else's work out. Mine are blasted and painted.

 

[dgswinger]

i may be wrong if someone knows better please correct me......but dont the 63-66 A bodys take special manifolds with an outlet on the driver side that faces directly back because the engine bays are a little tighter than the 67-up a-bodys look at my pics this may help the bottom pic is the 67-up style the early abody driver side is the important one!!

 

[VDART]

dg you are correct!1

not sure how the later style fit in the smaller engine bay-- a member had a situation with this exact problem. seller told him they were correct & they were for the later style--- but there is a difference, Lawrence

 

[crackedback]

I've got some late model Dakota exhaust manifolds that guys have used on SB early A's.

http://www.forabodiesonly.com/mopar/showthread.php?t=216507

 

[1wild&crazyguy]

If I'm not mistaken...its only the drivers side manifold that needs to be considered.
As in...the later style pass side fits, just need the early style driver side.

 

[newmexguy]

thanks for the good information!