Is there a crossmenber template or CAD drawing for a 904/ A500 swap? I'm from Brazil and can't buy it ready..
If you have a template I would love to get a copy of it.Tried to PM you, but your in-box is full.
Just SentTried to PM you, but your in-box is full.
If you have a template I would love to get a copy of it.
I'm drawing one.. as soon as I had it done I will share..Would like to clarify that I also do not have a template, or the part to make one from, so will also interestedly watch as our FABO community continues to chime in.
I was gonna do the same and reverse engineer it off the web sites pix.
I will finish my CAD and send to laser cut .. I will weld and if it's ok I could send the CAD to anyone tha could be interested... special regards to my friend Glenn that send me all the specs always responding with cordiality...Well damn. Looks like your further along than I am. I was gonna template it out on card stock so I could xfer it to metal and cut it out. Have the idea in my head, just have not gotten to it yet.
Actually I did it before sending it to cutYour cad drawing looks great, however, I think you forgot these 2 tabs that get bent 90° I added them in red. Look at the crossmember pix again, you can see them. If you could print these out actual size the pieces need to be made, so I can make templates off the drawings that would be great, I dont have access to CAD equipment to print them out. Would gladly pay you for your time and effort.
View attachment 1715419068
I will send you as soon as I check if that was ok... CURITIBA south... Worked at embraer in the midle of 2000 something on the financial departament... Campinas SPI am more of a trace it out and cut and bend it myself sorta guy, I dont have access to what your talking about. If you could print me pix of the parts full size and mail it to me I can trace em out, cut em out, and make them myself.