adjustable rockers

[muddacres]

I bought a set of adj. rockers with push rods. I have comp cams thumper cam, springs and lifters. The push rods measure 8" they are about 1/2" to long. What would 8" push rods go to? Sorry it is 340
Thanks
Jim

 

[70aarcuda]

hydraulic cam and hydraulic lifter with adjustable rocker ...generally run in the 7.33 inch range....

buy a checking pushrod and measure them to make sure...

 

[Locomotion]

Make sure you got the correct rockers! I have no ides what engine 8" pushrods go to. They are too short for a low deck big block (i.e.: 361, 383, 400).

Actually, OEM solid cam LA pushrods tend to be 7.50" while hydraulics are about 7.23". I always felt that the 7.33 that Comp Cam advertises would be incorrect for most applications of either style lifter.

 

[pishta]

8.00 is SB chevy, ford 351W, etc.