70orangeswinger
Well-Known Member
I put a Edelbrock RPM high rise intake on my 340 1970 Dart with an edelbrock 750 carb but now I don't have enough clearance to close the hood. I tryed a deeper air cleaner but it hits the electric choke. Any ideas?
Air Cleaner Clearance
- Thread starter 70orangeswinger
- Start date
-
66dartman
Well-Known Member
Spectre has a carb bonnet that you can connect to a hose and move your air cleaner to a remote location. They have a lot of options on thier website.
Burntorange70
Well-Known Member
The stock 340 one will not clear?
70orangeswinger
Well-Known Member
Unfortunately no.
abodyjoe
Well-Known Member
what rpm intake? the regular rpm or th air gap.. because my rpm and stock air cleaner just fits under the stock hood..
Burntorange70
Well-Known Member
Hmmmm??? Strange. I got a stock intake but with a 1/2 inch spacer and the carb stud sticking up another 1/2 or so. Looked to me like an Airgap and a 1/2 spacer would work with a stock aircleaner. Is it the hood will not close or the carb choke hits the air box?
briankaplan
greenduster
Got a air gap on the Duster. 750 Holley. With a normal drop base and a 3 in.
filter it will clear. Now with a 4 in. filter it go's through the roof, or should I
say the hood. LOL.
I have this set up on now. The top of the filter sits at the hood line. Works
great with the dual snorkle scoop. Yes I did cut out the hood.
filter it will clear. Now with a 4 in. filter it go's through the roof, or should I
say the hood. LOL.
I have this set up on now. The top of the filter sits at the hood line. Works
great with the dual snorkle scoop. Yes I did cut out the hood.
-
