440magcars
Well-Known Member
Hey guys. I put a F2 procharger in my 440 dart and it's mounted on the passenger side. Now I need to relocated the alternator. Anyone know of a kit? Thanks Jeff
I was thinking maybe drilling and tapping the drivers side
I dont know whether it will matter if the head is able to be drilled and tapped. That side head is farther forward than the passenger side and I highly doubt you would be able to get the pulley lined up without spacing out everything else. That is why I mounted mine up high. Any where lower on the motor and the back of alternator hit the head and was nowhere near lining up.
i trimmed about 1/4" off the back side of the water pump housing,
upper bolt hole
my pulleys set close to the engine> alt, water pump, crank>> no P/S
HOLY manifolds, batman!!!! THIS was worth the morning glance, LOL
Thanks for the info. I will give that a try. I have to change my radiator to a drivers side upper. So not sure if I can run the hose around the alternator.