Badart
Senior Member
I am debating. I have a chance to pick a 360 tunnel ram on a parts trade. I have always wanted to run dual quads sticking out to the hood. :toothy7: My 360 is done as soon as I pick up my heads from the machine shop. I planned on running a Eddy RPM and a 750 that I already have, but this might be too tempting. What carbs would you guys recommend? How would the street manners be? This will be a weekend cruiser and make the occasional trip to the track.
Here is my combo
Zero deck 360 shooting for 10:1 CR
KB107 .030" over
Stock rods and crank
Comp XE275HL
J heads 2.02 1.60 (mild porting and bowl blending by my engine builder)
1.6 roller rockers
904 with TF-2 and 3K stall convertor
3.91 gears with detroit locker
This is what it would be going into.
View attachment ride3.jpg
View attachment ride4.jpg
Here is my combo
Zero deck 360 shooting for 10:1 CR
KB107 .030" over
Stock rods and crank
Comp XE275HL
J heads 2.02 1.60 (mild porting and bowl blending by my engine builder)
1.6 roller rockers
904 with TF-2 and 3K stall convertor
3.91 gears with detroit locker
This is what it would be going into.
View attachment ride3.jpg
View attachment ride4.jpg