Bearing noise

[dropshot1]

Im just in the middle of breaking i a new third member, so i got the back end on jack stands letting it run at idle in first gear, if i get close to my rear wheels i hear noise which sounds like a swishing sound from both bearings,i didnt replace them when i had the axles out because everything looked okay, is this sound normal because the wheel is off the ground, or am i wishful thinking.ps i did regrease the besrings

 

[RedFish]

"swishing" suggests brake noise. Bad bearings roar. Pull the wheels and drums to hear bearing noise.

 

[Tooljunkie]

Stethesope on axle housing then backing plate. Swishing is brake shoes.

 

[dropshot1]

I hope it just the brakes ! Thanks guys

 

[TrailBeast]

I hope it just the brakes ! Thanks guys

If it sounds like someone scrubbing the floor with a stiff brush it's the brakes.(normal)
If it sounds like someone rolling a cannon ball across concrete is a bearing.