[FOR SALE] Big block 915 heads (NOR CAL)

-
Status
Not open for further replies.

MomsDuster

Well-Known Member
Joined
Apr 17, 2016
Messages
5,154
Reaction score
6,218
Location
Vacaville Ca
Rating - 100%
4   0   0
Contact seller
I have a pair of big block 915 heads. Came off of my running motor. Nothing wrong with them other than one broken keeper from when I pulled the valves, out, and didn’t number or put them back in the holes the came from. Will come with brand new springs from 440 source for a .510 lift cam. Haven’t measured the valves, but will if folks are interested. Don’t know what they’re worth and I’m not in a rush to sell. Also don’t have any interest in shipping them. Northern California pick up.
Asking $500 or reasonable offer

IMG_9031.jpeg


IMG_9030.jpeg


IMG_9029.jpeg


IMG_9028.jpeg


IMG_9027.jpeg


IMG_9026.jpeg


IMG_9025.jpeg


IMG_9024.jpeg


IMG_9035.jpeg
 
Last edited:
If I was to use them again, I’d have no problem with a quick lapping of the valves, put them back together and run them. They are short one keeper though.
 
I have some extra keepers & I could send you one, single groove. 7 degree (iirc) if you need either 5/16 or 3/8, I have both.
 
Status
Not open for further replies.
-
Back
Top