moparkrazed
Moparkrazed
Hey guys, I’m close to getting my car back on the road (1975 Dodge Dart swinger with a 318). I wired up my motor and did a test fire the other day and it fired right up. I started hooking up my other wires last night and grounded the blower motor. I turned the acc switch on from the ignition and the fan started blowing but the switch was set at off. I turners everything off unplugged the battery and double checked my wires. I also noticed the fan speed selector was stuck. I got that moving up and down again but no the fan won’t come on at all. I’m heading back to the shop today to check fuses and to make sure I have power getting to the blower motor still. What could be the issue? A bad switch maybe? Thanks for any insight anyone can offer. I purchased a shop manual and studied it last night and the wiring appears to be correct.