this is Version 2.0 a re-attempt at this thread
TPI = thread per inch
the format is: ...pic of the fastener
first column : bolt diameter, head wrench size, Threads per inch
second column: quantity of that particular fastener, tourque spec (if available), and length
Bolts may vary over the years but these are the fasteners that came from a 1970 non-HP 440 non a/c non PS
all length measurements are under head lengths..so the bolt head is not included in the length
this will be covered in 9 groups in 9 replies
TPI = thread per inch
the format is: ...pic of the fastener
first column : bolt diameter, head wrench size, Threads per inch
second column: quantity of that particular fastener, tourque spec (if available), and length
Bolts may vary over the years but these are the fasteners that came from a 1970 non-HP 440 non a/c non PS
all length measurements are under head lengths..so the bolt head is not included in the length
this will be covered in 9 groups in 9 replies