Mopar92
Well-Known Member
can anybody tell me the bolt thread and length bolts to bolt the mount to the trans? A833. Stock mount.
Bolts for shift mount?
- Thread starter Mopar92
- Start date
-
3/8"-16tpi, 3/4" long threads, 1" overall, head diameter 3/4"
Mopar92
Well-Known Member
Cool thanks. My local hardware store had everything I needed. That's exactly what I got.
Are the two shifter bolts supposed to be mixed ? My plate is 3/8 one bolt and 7/16 for the other one.
Are the two shifter bolts supposed to be mixed ? My plate is 3/8 one bolt and 7/16 for the other one.
All 3 of mine are the same!!
Mopar92
Well-Known Member
No sorry. The shifter to plate bolts. Not the 3 countersink bolts. Those are the same on mine as well.
694spd
Well-Known Member
The two shifter mounting bolts to the plate are as follows. The upper bolt is: 7/16"-14 x 3-1/4"
The lower bolt is 3/8"-16 x 3"
Both bolts are mounted using a flat washer and a lock washer under the head.
The lower bolt is 3/8"-16 x 3"
Both bolts are mounted using a flat washer and a lock washer under the head.
Mopar92
Well-Known Member
Shoot. Ok that's good. Hardware store only had bolts 3" or 4". I grabbed 3".
-
