Carb to Holley Terminator EFI Conversion How To w/lots of pics

-
Well, I am finally back from the ship. I spend the weekend with the family and today I was all caught up on the "Honey Do's" so I decided to do some tinkering on the Mopar today. It is close to the 100's here so I had to make the workspace a little comfy before I began! Today I finished up the exhaust and fabbed/welded in the mounts for the fuel pump and filter. I primed and painted everything up and it looks pretty damn good! I will bolt everything down this week and reinstall the fuel cell. The fuel system is pretty well hidden now and should provide plenty of fuel to the new setup. Stand by for more pics.
 

Attachments

  • IMG_3529.jpg
    43.6 KB · Views: 230
  • IMG_3545.jpg
    50.4 KB · Views: 226
  • IMG_3543.jpg
    76.1 KB · Views: 217
  • IMG_3541.jpg
    48.7 KB · Views: 213
  • IMG_3540.jpg
    49.3 KB · Views: 232
  • IMG_3539.jpg
    51.8 KB · Views: 218
  • IMG_3538.jpg
    54.1 KB · Views: 222
  • IMG_3535.jpg
    45 KB · Views: 237
  • IMG_3533.jpg
    31.2 KB · Views: 222
  • IMG_3530.jpg
    50.6 KB · Views: 250
That's good progress........now wire up my car, lol!!

Yeah, those little stints sailing the ocean blue sure do get in the way of him coming over to help me do wiring, lol.........yeah, he hates me!!
 
5.7 hemi said:
That's good progress........now wire up my car, lol!!

Yeah, those little stints sailing the ocean blue sure do get in the way of him coming over to help me do wiring, lol.........yeah, he hates me!!
Click to expand...

Thanks...I will come over Wednesday to wire her up for you. Have the beer cold and ready!
 
Here are some pics from last night. I had to modify the fuel cell cage because I forgot to take into account the sump on the fuel cell so it hit the mounts. I basically just lowered the fuel pump mount and everything fits now. Now I have moved on to all of the wiring. I cut a hole in the firewall for the harness and started getting everything routed. More to follow...
 

Attachments

  • IMG_3575.jpg
    52.2 KB · Views: 183
  • IMG_3574.jpg
    61 KB · Views: 178
  • IMG_3569.jpg
    59.9 KB · Views: 187
  • IMG_3558.jpg
    54 KB · Views: 194
  • IMG_3554.jpg
    80.1 KB · Views: 177
  • IMG_3553.jpg
    69.1 KB · Views: 209
  • IMG_3551.jpg
    44 KB · Views: 200
  • IMG_3550.jpg
    74.6 KB · Views: 182
  • IMG_3549.jpg
    76.8 KB · Views: 188
  • IMG_3547.jpg
    44.7 KB · Views: 174
OK here are some long overdue updates. Zach came over and helped me install the billet firewall plug and work some wiring. While he was there he said my grille looked like **** so we removed it and he is restoring it for me. That one is beyond my scope as it is mostly plastic. He is the grille expert. I got all of the wiring finished and re-intalled the x-pipe. I finally found that nasty exhaust leak! It ended up being a leaking header collector gasket! Here are some pics of the progress.
 

Attachments

  • IMG_3649.jpg
    39.1 KB · Views: 160
  • IMG_3647.jpg
    43.1 KB · Views: 162
  • IMG_3646.jpg
    39.7 KB · Views: 152
  • IMG_3643.jpg
    57.6 KB · Views: 158
  • IMG_3642.jpg
    37.3 KB · Views: 168
  • IMG_3616.jpg
    32.3 KB · Views: 157
  • IMG_3615.jpg
    44.6 KB · Views: 143
  • IMG_3608.jpg
    37.9 KB · Views: 160
Here are some pics of the 100psi fuel pressure switch, and the 3.5" EFI display to control everything. Zach came over and helped me final wire everything and we fired it up. Stand by for the video! I promise, its badass!
 

Attachments

  • IMG_3660.jpg
    40.7 KB · Views: 177
  • IMG_3661.jpg
    43.9 KB · Views: 165
  • IMG_3662.jpg
    48.1 KB · Views: 169
  • IMG_3666.jpg
    18.5 KB · Views: 166
My directorial debut is Oscar worthy, lol!!!
 
Thanks for the help! She is night and day difference! Now get my grille done so I can drive her!:protest::burnout::supz:
 
Yeah, yeah, yeah......I'm working on it.
 
OK here are some more videos of the cold start, and once warmed up. I have to do a lot of idle learning for IAC and A/F ratio so once thats set, she is on the road! Not sure if anyone is seeing them or not so if they are not working please let me know. I plan to drive her this week for more learning and take it to a car show this Saturday at Pep Boys.

Cold Start:

[ame]http://vid108.photobucket.com/albums/n39/smartken22/IMG_3681.mp4[/ame]

Warming Up:

[ame]http://vid108.photobucket.com/albums/n39/smartken22/IMG_3684.mp4[/ame]

Warmed Up:

[ame]http://vid108.photobucket.com/albums/n39/smartken22/IMG_3683.mp4[/ame]
 
Your car is looking and running like a bat outta hell!!
 
Do you know the specific name of the display, and was it included, or optional? I thought what came with it was the smaller handheld "controller."
 
That display is the optional upgraded 3.5" one for this system. I got it from a member on here who I traded the fuel pressure regulator for. In the harness there is a CAN1 and CAN 2 plug. I run the smaller display on CAN1 and the 3.5" display in CAN2. Here is the link if you want to purchase.

http://www.jegs.com/i/Holley/510/553-108/10002/-1?parentProductId=

67Dart273 said:
Do you know the specific name of the display, and was it included, or optional? I thought what came with it was the smaller handheld "controller."
Click to expand...
 
You must log in or register to reply here.
-

Back
Top