converter weights

[demontel]

a freind of mine has bought a dart with a 73 ,340 in it ,and has a vibration ,i think it could be a mismatch of converters ,if it has got an external balance ,where would the weights be located and are they visible ,cos if they aint there i think he needs one of them b&m flexplates ,.......thanks tel

 

[demontel]

cmon chaps ,,one of you must know where these infernal weights live

 

[moparracer]

On each side of the drain plug on stock converter.... i think

 

[OUTLAW]

i did the opposite manueverand placed the converter weights on my flywheel by lining up the flexplat to my flywheel and transfer ing the weights that way so it should work in reversre
so here is a link on making a flywheel hope it helps with a toque converter

http://sybertek.us/moparsa2e/viewtopic.php?t=532

 

[demontel]

had a look and could not see no weights ,i think he needs a b&m flex plate ,hes got a bit of vibration at about 4000rpm ,,,thanks chaps

 

[340duster]

If you can weld, Mopar performance makes a weight kit that can be welded to the converter