GDL
Well-Known Member
Anyone ever run one? Impressions? There is a seemingly clean fireball cam in the 340 I bought and I'm debating in keeping or selling it.
Crane fireball 300a cam
- Thread starter GDL
- Start date
-
The cams ,work. Need ,a stock set,or bowl ported 1.88's . Nice grind .Slow ramps,RPM,like hell..Run a real replacement 340 valve spring.Enjoy,...
GDL
Well-Known Member
In English lol? Streetable cam or more race? Also, I'm assuming no real low end and a strong top end?
Head work helps?
Head work helps?
Sir,what is your combo ? These cams,work.
Crane Fireball #300A
Should be .447" / .447" Lift with an advertised Duration of 300*
Duration @ .050" = 222* to 232*
Flat on the Bottom, but pulls hard on the Top End.
Good up to 6500 RPM's.
Idle @ 1000 RPM, but has a nice 'chop-sound'.
Should be .447" / .447" Lift with an advertised Duration of 300*
Duration @ .050" = 222* to 232*
Flat on the Bottom, but pulls hard on the Top End.
Good up to 6500 RPM's.
Idle @ 1000 RPM, but has a nice 'chop-sound'.
-
