Crower Magnum 360 cam.......

[Abodybomber]

Sweet cam ,with stock heads.Has a 340 cam, idle to it(slightly rumpy).21 inches of vacuum,at idle. Ramped up the cylinder heads,and compression.Dropped in,added 1110 Hughes springs/ matching retainers. Worked sweet. Specs: [email protected],284 advertised..307 lobe lift,.491 total. 190 .00 shipped. Has four hours run time .PM.,for pics.

 

[subcom]

Hello. What's the Crower Part# on this or is it a custom grind?

thanks

 

[Abodybomber]

Crowed 34416 .Not in the catalogs,but on the website. Would be a nice daily driver cam,with a small stall converter,and stock Magnum heads. FWIW,I sent mine in to get foreground. Had no response,until now on the ad.Sorry.

 

[Abodybomber]

Belated bump.Got the cam back. Cam grinder,never got to it.......

 

[bad440]

wtf???????

 

[Abodybomber]

New cam,Howard's? Good to go. The Crower ,sitting on top,of the mill. The can grinder,had a loved one pass away. That "unwanted cam " ,post,real life.(lol!).

 

[bozvaliant]

Hi is the lift .491 with the 1.6 rockers?

 

[Abodybomber]

Yes,.491 lift with 1.6.