[Found!] driver side drum hardware, just the crossbar

[Abe lugo]

I believe it may be the equalizer bar that separates the pads, right under the brake cylinder. there is also a small spring that goes on it.
Just PM if you happen to have this part.
Thanks
​

 

[whitepunkonnitro]

Need to know the size of the rear drums. You have several possible choices

 

[jazak5]

this is a repeat do a search // emergency brake equalizer barhttp://www.ebay.com/itm/11-2-5-brake-hardware-MOPAR-DODGE-PLYMOUTH-8-3-4-DRUM-struts-levers-emergency-/282301275248?hash=item41ba779c70:g:OWIAAOSwux5YXYez&vxp=mtr

 

[Abe lugo]

Need to know the size of the rear drums. You have several possible choices

I literally just went out measured, the drums are 11", the bar itself is right about 8"
It turns out that it is actually part of the parking brake. I seen it called the parking brake strut.

Thanks for checking.

The one on ebay look like it has an extra lip.

 

[hemi71x]

[FOR SALE] - Parking Brake Levers & Struts For The 11" Inch Rear Brakes

For your consideration, i have these for sale, here on this forum.
I won't break up the set, though.

 

[72bluNblu]

Here you go. The flange doesn't matter, they made both the kind with the flange and without for the 11x2.5" brakes. I probably have an extra but it's not worth selling it for $6.75.

21128 is the left side, 21127 is the right side.

Chrysler Drum Brake Bar 21128 Left Side | eBay