RJK3
8 3/4 Hoarder
I'm replacing the /6 ECU with a V8 ECU, the /6 connector has 5 wires and the V8 ECU has 4 pins.
What do I need to do with the extra wire?
Also, what are the Ohm values I should see in the ballast resistor for MP chrome ECU?
Do I need to swap the voltage regulator as well?
Thanks for the help!
What do I need to do with the extra wire?
Also, what are the Ohm values I should see in the ballast resistor for MP chrome ECU?
Do I need to swap the voltage regulator as well?
Thanks for the help!