engine mount on 318

[phill72]

hi all hoping for help on engine mount bolt holes on 318 v8,does one side have 3 boltholes on casting and other side 4?. the engineer who is doing a inspection for registration is wanting information to verify this so any documentation or photos would help thankyou hope someone can help

 

[krazykuda]

I believe that both sides on the 318 have 4 holes.

Exactly what vintage 318 are we talking about???

Poly, LA, or Magnum????

 

[phill72]

Im not too sure what vintage but it is in a 72 duster and the vin no says it came out with a slant 6 so im not sure

 

[Leadfoot]

I believe that both sides on the 318 have 4 holes.

Exactly what vintage 318 are we talking about???

Poly, LA, or Magnum????

Something makes me want to say three. I didn't want to take a walk out to the garage so I grabbed a pic off the web. Of course some had four and some had three and four. So who knows?

 

[GaryS]

My '66 Poly has three holes on each side on the block ears. The mounts themselves have four.

 

[AJ/FormS]

Youre all right.
The blocks have 4 ears
one mount has 3 holes, and the other usually has 4 holes.
I cant remember ever seeing more than 3 bolts per side.

 

[krazykuda]

A little mis-information here. Hopefully this will clear some of it up:

71 318 - 4 holes per side:

View attachment 318 Mount Lt A01 B.jpg

View attachment 318 Mount Lt A02 B.jpg

View attachment 318 Mount Rt A01 B.jpg

View attachment 318 Mount Rt A02 B.jpg

91 360 - 3 holes per side:

View attachment 360 Mount Lt A01 B.jpg

View attachment 360 Mount Lt A02 B.jpg

View attachment 360 Mount Rt A01 B.jpg

 

[phill72]

thankyou to all contributers the photos of mounts and block should clear it up for me ,much appreciated