Exhaust in 66 abody

[manchalk]

puting in a 440 in a 66 Baracuda I would like to keep the inner fenders in the car how or what can i use for headers or manifolds???what brand make or year or am I on my own

 

[C130 Chief]

You're definitely on your own. I don't know of any off-the-shelf header to put an RB engine in an early A, much less an underchassis header. A 440 into an early car has been done, but it's not a popular swap for a reason; it really doesn't fit well.

Have you considered flipping C-body manifolds upside down with short stacks through the hood?

 

['64 Cuda]

Don't know if this will help any or not. It's is a 383 in a 66.

http://www.forabodiesonly.com/mopar/showthread.php?t=24064

Here's a bit more.

http://www.forabodiesonly.com/mopar/showthread.php?t=21126

 

[moper]

A member here made his own and ran them forward and then back. I'm not sure how good that might end up being but having a 65 and more than a couple big blocks I think you need a TiG and some really good fab skills to get anything in there.

 

[manchalk]

Thank YOU that was very helpful!

 

[manchalk]

Yes you are correct tig welder fab skills and some imagination