Factory bucket seat track height

[coro500net]

Trying to put aftermarket bucket seats in my 69 Valiant.
I bought a set of repop super stock seat brackets but the seat is to high as I’m 6 2ft. So I’m going to make my own brackets.
I had previous bucket seat A body and they fit fine. So I figured that height of seat track will work. Anybody have a measurement?
Photo shows bracket reversed as I was trying different positions.

 

[str12-340]

there are spacers available based on a factory design - black plastic of some sort - had to use them on my Dart. They go between the bracket and the floor.

 

[banzaibullitt]

^^^^ Where do you get these spacers?? ^^^^

 

[str12-340]

lots of places sell them. Here is the link for Legendary - 66/70 A & B-BODY SEAT TRACK SPACERS (4/PK) | Legendary Auto Interiors

$22 for a set of four raises 1 seat evenly. I used them to tilt my seats back a bit too by putting an extra in front. They fit together so you can stack them.

 

[banzaibullitt]

Do you know what the dimensions are?

 

[str12-340]

Would you also like me to buy and install them for you?

 

[banzaibullitt]

Sure.
The link doesn't show any dimensions.