[FOR SALE] Fiberglass Hood with Aero Scoop for 70 to 72 Duster/Scamp

-
Status
Not open for further replies.

GTX JOHN

FABO Gold Member
FABO Gold Member
Joined
Dec 12, 2009
Messages
3,292
Reaction score
4,605
Location
Boulder City NV.
Rating - 100%
105   0   0
Contact seller
Here is the Glass Hood off my Duster that was in the finals of Pinks All Out

It is absolutely top quality and much better than any of the junk I have seen
the last few years.

It is full reinforced/Support with underside bracing as extremely solid and thick
and certainly not flimsy junk that you see everywhere!e3d

It has provisions for mounting for stock hood springs (Use light Springs)

The paint and graphics are not new but still pretty nice and presentable.
It was on the race car for a few years but still very good shape!
We replaced the front clip with a Demon front clip.

You would have a very hard time duplicate this quality at any price as the
fiberglass shops do not see to care anymore even if you spent $1500./2000.

Fairly priced at = $750.00

Will deliver free to So Cal or So Nevada.
Going racing in Idaho in a few weeks and can deliver
on yhe way

20240426_115248.jpg


20240426_115342.jpg


20240426_115302.jpg
 
Last edited:
I will measure it = but it is tall.

It will fit 73 to 76 if 70 to 72 bumper and grille used as well.

I could deliver it as going racing in Oregon in a couple weeks and going up I5.
 
I will measure it = but it is tall.

It will fit 73 to 76 if 70 to 72 bumper and grille used as well.
Dang, I don’t want to swap out the grill. Bummer. Appreciate the info. He scoop front was about 7in by the look of it?
 
Could you measure where the hole in the hood starts (distance from the front) and the distance from the rear of the hood? Doing a tunnel ram soon and it may work if I remove the scoop.
 
It had a tunnel ram with two 660s on it for a while.
I will measure it tomorrow. There was a trim piece put in
when we went to one carb on the Indy motor, but it is easily
removed.
I will be in San Bernadino Saturday and could bring it.
I consult in that area about once a week.
 
Last edited:
Here are pictures of the opening.
Scoop is only bolted on so that we could
remove it easly.
I am racing in Portland Or. all next week but
will be near you next week after that.

20240705_153541.jpg


20240705_153559.jpg


20240705_153602.jpg


20240705_153623.jpg


20240705_153702.jpg


20240705_153720.jpg


20240705_153733.jpg
 
Here are pictures of the opening.
Scoop is only bolted on so that we could
remove it easly.
I am racing in Portland Or. all next week but
will be near you next week after that.

View attachment 1716272276

View attachment 1716272277

View attachment 1716272278

View attachment 1716272279

View attachment 1716272280

View attachment 1716272281

View attachment 1716272282


Let me think on it for a couple days. If I do get it you’re more than welcome to keep the scoop I’ll have no use for it.
 
Status
Not open for further replies.
-
Back
Top