moparhunter
Well-Known Member
- Joined
- Oct 5, 2006
- Messages
- 714
- Reaction score
- 204
I hope I can make this clear for all to figure out what I’m talking about.
Working on reassembling a 69 Dart steering column ( floor shift / manual )
modified for the aftermarket lower bearing )
The issue I’m having is because it’s been apart for a while, I can’t figure out how to keep the outer column sleeves from turning ( they are supposed to be frozen to the column ) . I have the spring at the bottom of the column. I have the wavy washer at the top of the column. See pictures I hope this helps when I’m talking about.
Working on reassembling a 69 Dart steering column ( floor shift / manual )
modified for the aftermarket lower bearing )
The issue I’m having is because it’s been apart for a while, I can’t figure out how to keep the outer column sleeves from turning ( they are supposed to be frozen to the column ) . I have the spring at the bottom of the column. I have the wavy washer at the top of the column. See pictures I hope this helps when I’m talking about.