kennethjohn09
Member
Planning on running holley efi on my build and im gonna use a nag1 transmission wondering if the tcm would work with holley terminator x
Holley efi and nag1 transmission
- Thread starter kennethjohn09
- Start date
-
DionR
Well-Known Member
Pretty sure that would be a big no. I think the TCM uses input from the PCM and the Holley won't talk to it.
Hotwire Auto has a tech article on getting a NAG1 wired up and it includes an ABS module, speed sensor, FCM, shifter and TCM, besides the PCM.
www.hotwireauto.com
There is a standalone option much like for the 8HP, from the same guy.
That would probably be your best bet for running a NAG1 with the Holley PCM.
Hotwire Auto has a tech article on getting a NAG1 wired up and it includes an ABS module, speed sensor, FCM, shifter and TCM, besides the PCM.
Swapping Chrysler's Nag1/WA580 Transmission
There is a standalone option much like for the 8HP, from the same guy.
That would probably be your best bet for running a NAG1 with the Holley PCM.
-
