I need help!! (carb issue)

-
K

KFin

Member
Joined
Sep 3, 2013
Messages
10
Reaction score
0
Location
Portland
So I am running the stock Holley single barrel 1920 carb on my valiant and I took it apart to rebuild the basic parts. A little steel ball fell out and I can't for the life of me figure out where or how it goes back in. I believe that it is for the throttle but I can't figure out where it goes. Any help would be great!

Thanks!

Kyle
 
I saw a diagram like that one but in taking mine apart it appears that I don't even have #59 or anything that looks like it. Ugh.
 
Not being smart but do you realize part #44 is screwed in over top of it? If you can see #44 in the fuel bowl, you have to remove the two screws in it to get to the rest of it. Dennis
 
Yes I know that 44 is screwed on over the top lol. I pulled that out to see if there was any way that the ball slipped out, no such luck. Fuuuuuuck..... Are we allowed to drop the F bomb on here?
 
looking at the available manuals online I see 2 check balls. one is for the pump inlet and the other is for the power enrichment system off the main well.

Hope this helps.
 
You must log in or register to reply here.
-

Back
Top