[SOLD] Indy 360-1 heads for sale

[zhandfull]

No pictures yet, maybe next weekend. I'm considering selling some Indy 360-1 heads. They were bought new from Indy with optional CNC full port and polish including intake port match and upgraded to the 10 degree retainers.

*Includes 2ea heads complete with valves and springs
*Indy 360-3R intake manifold
*Indy supplied 1.5 ratio black roller rockers and shafts complete
*Custom length push rods for a solid lifter cam

These heads are lightly used probably less than 30 passes and have not been run since I had Brian at IMM check them out and do a valve job on them. Located in Rancho Cucamonga, CA
$3,500.00 plus shipping if required.

Additional details on the attached cut sheet.

 

[zhandfull]

Pictures and a lower price $3,000 and that is firm

 

[9secRR]

Did Brian flow these on his bench?

 

[zhandfull]

I didn't pay for any flow testing from Brian. So as far as I know he didn't flow test them.

 

[9secRR]

Did you buy these heads new?

They flow 339?

 

[zhandfull]

Yes, bought them new and ran them on a mild 11.5 to 1 compression 418 cu small block.

Indy advertises them flowing 339 at .700 lift intake with the full port and polish like these heads were ordered and have. I'm sure some will and do argue the numbers and that's okay with me. They are outstanding heads for a large cubic inch or boosted application in my opinion. If they don't sell I have no problem keeping them for a future project.

 

[scamp 408]

Are these the 245cc version ?

 

[zhandfull]

I believe the full CNC porting makes them the 245 version.

 

[swifter]

Might be a stupid question but do these only work on 59 degree block?????

 

[zhandfull]

Might be a stupid question but do these only work on 59 degree block?????

These heads are for the standard 59 degree block. I know Indy can build them for 48 degree blocks, not sure of how they do that though or if a head can be converted.

 

[swifter]

thank you--Steve