pettybludart
Well-Known Member
Has anyone used KRP roller rockers with their LA360?How did they perform?I have a chance to purchase some and am wondering what there worth?Thanks
Well someone has to be the ginnie pig here.
I would never, ever ask a member here to be a "Guinea Pig"
I mean come on.....
A guy asks about'em and somebody says.. 'never heard of them', 'I'd stay away''
Damn straight! I researched this name the best I could and only found an importer in Long Beach CA and an exporter out Punjab India.
Based upon what....cause some anonimous used another off brand and probably in the wrong app and broke his sht?
No, because I could find no mention of these afformentioned parts at all. That's what I posted.
How about =never heard of them, couldn't tell ya, got a pic?
Again, no link or pic could found.
I see people all the time who just bolt this sht together and not check retainer'rocker clearance, geometry, or even the quality of adjuster then when they break they're sht it's like... ''ohh those rockers are chinese junk''
:read2: :read2: :read2: :read2: :read2: :read2: :read2: :read2:
I can't believe the stuff that gets spread around the net, I mean there's stuff out there that you guys are missing out on cause of the example above.....
Huh... OK.
#1 I tried some imported roller rockers.
#2 I checked EVERYTHING before they were installed.
#3 The adjusters mushroomed and the rollers flattened. I was my own pig.
#4 I'm sure that it is possible that there is a facility in Punjab India that cares so much about our Mopars and keep the same or closer tolerances than Crane, Comp, Harland Sharp, Huges Engines or T&D (The best in the world IMHO), but I say if it walks, talks and looks like a duck, it's a duck.
#5 Tell me about all the "stuff" we're missing out on.
I'm not ranting but I had to actually set my beer down and take a breath for a sec, I'm fine now.:cheers:
:-DMaybe 1wildandcrazyguy could buy some and give us a report on them....
where would you be purchasing them? is there a link of some web page you can inject here? If they are like the KMJ roller rockers advertised on ebay then I would steer away from them. Very poor quality and fitment problems.Has anyone used KRP roller rockers with their LA360?How did they perform?I have a chance to purchase some and am wondering what there worth?Thanks
:read2: :-D:-D How about some "ACME" pistons?
Never assume about someone's firsthand knowledge. I may still have them or I may not. This was three years ago. If I still have them you'll see pics this week. I only talk about what I know as an engineer and what I've experienced. If you use these KRP rockers without fail, tell us about it and why..... Don't go off half-cocked because you feel your ego was bruised. If you have something to add, add it. I saw nothing but threats of showing some "pictures and time slips". Tell us why your imported rockers of whatever brand you are using are worth considering. Impresses upon us your knowledge. Who makes them? Were are were they purchased? How many miles are on them? What springs loads are they being used with? What kind and lift of cam?
I made my recommendation on my personal experience with some "Proform" rockers and the fact that I could find nothing on these KRP's. If it walks like a duck and sounds like a duck, it's most likely a duck and I will not risk another members hard work and money by telling them its a hawk. I also do the same in my professional life with clients. It's smart business.