looking for a built 340 or 360

-
Status
Not open for further replies.
340plot

340plot

the bushy bush
Joined
Jan 24, 2010
Messages
5,019
Reaction score
38
Location
va
Rating - 95.8%
23   1   0
Contact seller
i just found out that my 70 340 4 speed car has a 72 340, so now i am in the market for a 340 or 360 that is built. i am not looking for 500 hp, but 350-400 would be nice. also, it must be setup to run on a four speed.
as for price, i am flexable, so let me know what you got thanks in advanced
 
dodgedifferent2 said:
where are you located?
Click to expand...

Lol,I was going to ask the same thing!

I have a 360 4 bbl from a truck and some magnum heads. Could put thme on and you'd have a nice 9:1 street 360.

Oh and a crane cam that would get ya 400 h.p.
 
needsaresto said:
Lol,I was going to ask the same thing!

I have a 360 4 bbl from a truck and some magnum heads. Could put thme on and you'd have a nice 9:1 street 360.

Oh and a crane cam that would get ya 400 h.p.
Click to expand...

Wishful thinking there...
 
this is what i have ...

mopar 1973 360 (webbed)
bored .030,
9.6:1 compression,
284/484,
2.02 intake 1.60 exhaust 4323345 heads (police heads)
torker 340 intake
all forged internals.

needs a 750 carb.

373 hp @ 5500
400 f/lb @ 4500
 
340plot said:
i just found out that my 70 340 4 speed car has a 72 340, so now i am in the market for a 340 or 360 that is built. i am not looking for 500 hp, but 350-400 would be nice. also, it must be setup to run on a four speed.
as for price, i am flexable, so let me know what you got thanks in advanced
Click to expand...

I have a rebuilt very low mile 1971 340 in my 70 duster thats coming out and going up for sale if interested.
it comes with a LD340 intake but no ex manifolds, unless you have more $$$..
then I have 2 pairs.
I'm in socal, let me know.
 
I have a fresh '70 340 std bore, mild port J heads,solid cam.
zip18944 s.e.pa.
still in car if inertested.
 
340plot said:
i just found out that my 70 340 4 speed car has a 72 340, so now i am in the market for a 340 or 360 that is built. i am not looking for 500 hp, but 350-400 would be nice. also, it must be setup to run on a four speed.
as for price, i am flexable, so let me know what you got thanks in advanced
Click to expand...

Hi guys. I have a 71 340 bored 30 over, Speed Pro forged pistons, Mopar Performance .557 lift mechanical cam, X heads 2.02/1.60, Crane ADI rockers, double valve spings, hi volume oil pump, stock oil pan, and Mopar Performance black valve covers. Just need intake manifold and carb. This motor has not been installed in any vehicle or broken in yet. Need to break cam in. Have freight company that I work with which can ship to you. Please PM if your interested. Thanks!

sdc10226o.jpg
 
Status
Not open for further replies.
-

Back
Top