LOOKING FOR DOOR GLASS CHANNELS 65 Valiant/Barracuda

-
Status
Not open for further replies.
I have all that stuff still in the car Scotty!! I'll try to get some time to get it all out!!

Here are a couple pics of the gas pedal location. I lost yout email addy again!! Surprize huh??

The pedal sits on the flat embossment on the floorpan, about 3/4" of an inch from the left edge, and 4 7/8 and 5 7/8" down from the pinchweld where the pan meets the firewall!! Hope this helps, Geof
 

Attachments

  • 100_4780.jpg
    57.6 KB · Views: 98
  • 100_4781.jpg
    48.4 KB · Views: 106
thanks man....Ill try that....problem is that all that was replaced, so those embossments may be lost..... I have a round about estimate obviously due to wehre pedal sits on the push rod....
 
I still have a set of doors from a 65 cuda I parted last year, they have all of the stuff still in them. What exactly do you need?
 
Bob. I could really use everything. I need one piece of glass. Not sure which side. Need the inside handle mechanisms. Need window channels. Need regulators. Cylinders with key.

Ur not too far ....
 
Status
Not open for further replies.
-

Back
Top