[WANTED] Looking for this carb part

-
Status
Not open for further replies.

desy500

Well-Known Member
Joined
Nov 28, 2014
Messages
133
Reaction score
29
Location
PA.
Rating - 0%
0   0   0
Contact seller
got one Thanks
Anyone know where I can get this part - holley 1920 carb

IMG_20180331_124440636.jpg
 
Last edited:
Air cleaner bail, for '63-'67 9" diameter air cleaner with Holley 1920, Carter BBS, or Stromberg WA3 1bbl carburetor. Put up a want ad on here and on slantsix.org .
 
Air cleaner bail, for '63-'67 9" diameter air cleaner with Holley 1920, Carter BBS, or Stromberg WA3 1bbl carburetor.

IMG_20180331_124440636.jpg
 
There is a long bolt and a short bolt, which is correct for your needs!

NOS for $15 shipped from Ulf is an incredible deal!

IMG_4249.JPG
 
The long bolt is for '60-'62 170 engines, plus '60-'61 225 engines in big cars (Plymouth/Dodge, not Valiant/Lancer). All these use one of three different air cleaners with a flat floor. The '63-'67 air cleaners have a dropped floor (bottom of air filter element at a lower plane than carb neck) and so they use the shorter bolt.
 
The long bolt is for '60-'62 170 engines, plus '60-'61 225 engines in big cars (Plymouth/Dodge, not Valiant/Lancer). All these use one of three different air cleaners with a flat floor. The '63-'67 air cleaners have a dropped floor (bottom of air filter element at a lower plane than carb neck) and so they use the shorter bolt.



As always THANKS DAN
 
Status
Not open for further replies.
-
Back
Top