lower control arm and pivot shaft question

[coffeedart67]

Got my front end kit, how do istall the lower control arm bushing and pivot shaft? Do I install the bushing on the shaft then install the assembly into the lower control arm, or bushing into lca then pivot shaft into bushing?

Thanks
Aaron

 

[hemi71x]

http://www.moparmusclemagazine.com/tipstricks/155_0306_control_arms/viewall.html

 

[PST]

Hope this helps.

Thanks
James

 

[PST]

Also here is a links on a control arm rebuild that I did if you are interested.

http://www.forabodiesonly.com/mopar/showthread.php?t=224865

Thanks
James

 

[Jim Lusk]

It really doesn't matter which you do first, but it matters how. If you put the bushing in the arm first you need to support the center sleeve of the bushing while pressing the pin in. If you press the pin first you need to get around the pin to press the bushing into the arm.