Did a search, found that others have had this issue, but no resolutions posted. Nothing on the magnum swap page etc. even did the full google search. Every thread I found went completely off topic within 2 posts.
5.9 Magnum using EQ LA timing cover. I have the stock Magnum early 2 pc balancer without the integrated serpentine pulley. it definitely will not go on without hitting the timing marks.
I looked at my son's early 318 and it looks as though the Magnum balancer is 1/4" thicker than his. Without pulling his off, it looks like it's not offset as far back as the magnum either?
Anyone that has run into this, would a pro product or BluePrint balancer resolve my issue?
5.9 Magnum using EQ LA timing cover. I have the stock Magnum early 2 pc balancer without the integrated serpentine pulley. it definitely will not go on without hitting the timing marks.
I looked at my son's early 318 and it looks as though the Magnum balancer is 1/4" thicker than his. Without pulling his off, it looks like it's not offset as far back as the magnum either?
Anyone that has run into this, would a pro product or BluePrint balancer resolve my issue?