[FOR SALE] Mechanical Stuff and Things

[Dartn440]

Guys I am slowly trying to clean out my storage. I am not selling this because I have to. I am building a car port with attached storage and I am trying to downsize enough to get my stash in there. I have other bigger items, but no one seems to want those and shipping is out for most guys. I am trying not to clutter up the FABO pages so I will close and consolidate as items move along. All items are plus ship from 28387. Make offers, all I can do is say no and put on eBay.

Horns - Sparton Lo - blasted, primed, gloss black, bench tested functions well - $35
Spartan Hi - blasted - will finish in gloss black as well, bench tested, not functioning - $10

Filler tube - 71 Plymouth Duster with or without cap. I pulled this filler tube from a 71 Duster parts car I had when restoring my Demon. After a half dozen caps were purchased that did not fit, I put a 72 tube in the car that is not nearly as nice as this one. It had been blasted, primed, painted silver. A little crust inside. The cap is an aftermarket that is new. It fits. I got it AFTER I switched the tube to a 72 and up style. Asking $35 plus ship for cap and $50 plus ship for tube. Make offer on package. I also have a blasted and primed 72 and up cap ready for your color. Decent shape and gasket is intact. Asking $25 plus ship for it.

Stock valve covers from a late model 440. Nice shape. Blasted and primed. Tabs intact. No breathers. With baffles. Asking $30 plus ship.

Stock B body V8 Torsion bars $50plus ship

Stock 1.5 ratio big block steel rockers, shafts, hold downs $20 a set plus ship.

These are all nice, ready to use parts.

 

[Dartn440]

Dropped prices to what they are above. Adding two oil pans. No pick ups. Both small block stock pans as numbered. Bumps and small dents. Cleaned, blasted, no bolts. Pan 294 shows up as a 318/340 1970-72 A/B/C/E. Pan 343 is an unknown to me. I picked it up as a 360 pan....but it may be a late model magnum as it did not fit my motor. Either way, they are both $35 plus ship from 28387.

 

[Dartn440]

Adding this Edelbrock 383 intake 0-5500 rpm. Needs a good cleaning. I had this out for a member on FBBO and he decided shipping killed it. Selling for $160 plus ship from 28387

 

[Dartn440]

Intake sold. Rest is still here.

 

[Dartn440]

Bump....make me some offers...all on ebay

 

[Dartn440]

Reserve is off on the B body Torsion bars...selling for $26. Adding a set of Mopar 400 stock rods just back from the machine shop from my 72 block. Shot peened and fresh machine work to bearing surface. $160 plus ship obo

 

[Dartn440]

Ok sticking this thing back up here. B&M shifter. Cable for 904 needs replaced. What you see is what I have. Works fine. Bought for my Demon and did not get installed during build. $60 plus ship

 

[Dartn440]

Torsion bars sold

 

[Dartn440]

Here is another set of BB stock valve covers. I haven't touched them. Good shape. $45 plus ship

 

[SLOPAR72]

If you still have the Sandblasted Valvecovers I will take them. PM me and we can go from there....

Thanks,
JW

 

[Dartn440]

PM sent

 

[Dartn440]

Still cleaning....
Pushrods...random...unsure of condition. Not even bothering to run through the parts washer. $20 for the lot of them pics have size and number of rods in each bundle. Plus shipping from 28387...small flat rate should cover it.

Morose valve covers.....dent on one. Can easily bang out. Chrome still good. Dirty as hell. $30 plus shipping from 28387

Small block 4 blade fan with 2 1/2 spacer and hardware. $20 plus ship

Dipstick randomness. 8 for $30 plus ship.

 

[Dartn440]

Dipsticks....

 

[Dartn440]

Blasted valve covers sold. Shifter sold.

 

[Dartn440]

Still have a bunch of this stuff. Make me some offers....still cleaning up. I will be cleaning up some exhaust manifolds. Have a nice 273 core, a nice 400 core. PM me if you have needs.