ESDuster
Member
Contact seller
Mopar Small Block Steel Bellhousing Scattershield & Block Plate - EBAY auction, NO RESERVE! ITEM: 251430246829
Up for bid is a used small block Mopar steel bellhousing - scattershield with block plate included. Scattershield will fit 273/318/340/360 blocks with 4 speed manual transmission. IMPORTANT: bellhousing accepts transmission input bearing retainer diameter of 5.125 inches. Smaller retainer diameters can be accomodated by using custom register ring - spacer (NOT INCLUDED).
Bellhousing has been modified as follows and as shown in photos:
Location: Houston, TX area
Up for bid is a used small block Mopar steel bellhousing - scattershield with block plate included. Scattershield will fit 273/318/340/360 blocks with 4 speed manual transmission. IMPORTANT: bellhousing accepts transmission input bearing retainer diameter of 5.125 inches. Smaller retainer diameters can be accomodated by using custom register ring - spacer (NOT INCLUDED).
Bellhousing has been modified as follows and as shown in photos:
- Upper portion of bellhousing trimmed for ease of installation (6 outer fastener holes removed).
- Clutch fork pivot land height reduced ~1/8 inch. Can be adjusted by shimming if desired.
- Ground 2 "arcs" for increased clutch fork clearance.
Location: Houston, TX area